C2000/A2000D Fiber Diode ABP Laser
APB C2000/A2000D
Raycus RFL-ABP (Adjustable Beam Profile) fills the gap in domestic fiber laser beam mode adjustable technology. Using the customized optical fiber combiner developed by Raycus, different modes of output such as Gaussian spot, ring spot, mixed spot, etc. can be realized, which can be switched at will according to processing requirements. At the same time, the power of the fiber core and the ring core can be adjusted independently to achieve any power ratio between the fiber core and the ring core. Meeting the needs of high-quality laser cutting and welding has become another weapon to improve processing quality and efficiency.
Customer service hotline: 027-81338818 to 8137
Characteristics Of C2000/A2000D Fiber Diode ABP Laser
Technical characteristics
- Full fiber structure, stable and reliable
- The optical module is independently coupled into the core layer and ring core layer of the output fiber
- The power of the core/ring core can be adjusted independently, and the power switching time is short (on the order of milliseconds)
- With waveform editing function
Optical Properties
- Center power: 2000W(CW)
- Ring power: 2000W(Diode)
- Polarization : random (Diode)
- Power adjustment range (%): 10 ~ 100 ring core, outer ring power can be Independent adjusted
- Central wavelength (nm): Diode 915 ,CW 1080
- Spectral width (nm): ±10
- Output power instability (5hrs): ≤ ±2%
- Indicating light: 650nm, 0.1mW～1mW
- Electro-optical conversion efficiency (%): >35
Output characteristics
- Core diameter (μm): 50/400
- Output cable length (m): 20
- Bending diameter mm: ≥260
Electronic control characteristics
- Operation Voltage(V AC): Three-phase four-wire system AC 340V ~ 420V, 50/60Hz (with PE)lControl Method:Serial Communication / AD
Other characteristics
- Cooling method: water cooling
- Coolant flow L/min: ≥30
- coolant pressure bar: 7
- Working temperature (℃): 10～40
- Working humidity (%): < 70
Application of C2000/A2000D Fiber Diode ABP Laser APB C2000/A2000D
- Sheet Metal Welding
- 3D Printing
- Laser Research
