R-Series 300W Mopa Pulsed Fiber Laser
RFL-P300MX-R
Raycus single-mode 300W MOPA laser, based on a new generation of electronic control system; featuring Ethernet port function, supporting multiple control modes; with fast switching time, supporting frequency and power parameters switching in real time. The beam quality consistency is good, with high single pulse energy and good output power stability, suitable for electrode tab cutting, electrode column cleaning, electrolyte injection port cleaning, electrode plate cleaning; paint stripping and other new energy applications.
Customer service hotline: 027-81338818 to 8137
Characteristics Of R-Series 300W Mopa Pulsed Fiber Laser
Technical characteristics
- Real-time switching of frequency and power
- The switching time is short
- High beam quality
- High single pulse energy
- Network port functionality: Supports parameter setting, status viewing, and log reading through the network port
- High reliability
- Switching between multiple control modes
- Raycus software supports switching between internal control, external control, normal, and cross modes
Optical properties
- Average output power (W): 300W
- Center wavelength (nm): 1064±5
- Maximum single pulse energy: 2mj at 350 ns, 150 kHz
- Pulse width range: 10-350ns
- Maximum modulation frequency (kHz): 4000
- Repetition frequency/kHz: 1-4000
- Output power stability (%): ≤5
- Red light: 0.2-1mW
Output characteristics
- Input power (W): 1600
- Output connector: optical isolator
- Control interface: Ethernet port, RS232, DB25
- Beam quality BPP: <1
- Polarization state: Random
- Output fiber length (m): 3.5
Electronic control characteristics
- Power adjustment range (in %): 0-100
- Input voltage (V): 48V
Other characteristics
- Dimensions (mm W * H * D): 460*395*131
- Weight (kg): 26
- Storage temperature (℃): -10 to 60
- Operating temperature (℃): 0-40
- Cooling method: Air cooling
Application of R-Series 300W Mopa Pulsed Fiber Laser RFL-P300MX-R
- Cutting of lithium electrode tabs
- Polar cutting
- Polar cleaning
- Pole cleaning
- Cleaning of the liquid injection hole
- Busbar cleaning
- Busbar welding
